today it's time to take apart the new iphone 12 pro max apple's latest and greatest most powerful iphone and also the largest iphone that's ever been made with supposedly a new trick inside that we've never seen before i kind of broke the last iphone i took apart so cross your fingers this one survives let's get started [Music] [Applause] [Music] so the iphone 12 pro max is basically just a larger version of the iphone 12 pro with apple releasing four new iphones this year it does get a little confusing all you really need to know though is that the pro max has a larger screen larger battery and some slightly better cameras which is what we are after today if you remember last time i was trying to remove the screen i accidentally pried up underneath the glass instead of under the plastic frame and broke the display this time i'm making sure to lift the screen up high enough that i can get underneath the plastic part of the display with my pry tools since the screen is recessed this is much harder than it looks the reason we want to check out the camera units inside of the macs is because apple has engineered a new form of image stabilization that we've never seen inside of a smartphone before it's called sensor shift and can stabilize an image at over 5 000 times a second so if this is true it's actually pretty huge and a pretty big step forward in the mobile camera game as we can see my screen is still working so far thumbs up for that we're off to a good start there are four screws holding down a metal plate over the battery connector and screen ribbon once that's off i can unplug the battery like a little lego and then move to the second metal plate that covers the other ribbon connector it also has four screws once that's removed i can unplug the remaining screen ribbon and detach the display from the body not too shabby the cameras are all under this other metal plate but first let's take out the battery usually apple's pull tabs are kind of fun but not so much this time around all of the magical pull tabs keep on breaking [Music] but with a dab of isopropyl alcohol the stickiness underneath the battery dissolves and i can pry the battery out relatively easily the alcohol is non-conductive and evaporates pretty quickly so it doesn't hurt the electronics but still battery replacements could be easier now we can see what the pull tabs are supposed to be doing if we could actually grip them as they stretch theoretically they lose their stickiness and just pull right out from underneath the battery just not this time around now it's time to check out apple's latest innovation in mobile camera technology i know we don't always use apple and innovative in the same sentence but here we are and it's actually pretty impressive so inside the 12 pro max the top camera is the telephoto which does have optical image stabilization where the lens does the moving the wide angle is off the side with no ois and the main sensor is at the bottom and it looks like it does not have ois since the exterior lens is not moving but that's actually not the case the main camera has that sensor shift we talked about earlier which is actually much better and much cooler than regular ois but first let's grab the main camera lens out of the regular iphone 12 pro so we can compare them the regular size 12 pro has its main sensor at the top instead of the bottom the telephoto and main sensor locations are reversed between the two phones but that's not super important all of the cameras are very securely glued into a metal housing so they can work seamlessly with one another when the phone switches camera perspectives popping the camera module out from the housing is difficult but still possible remember we're still working with the normal iphone 12 pro at this point not the max just yet once the main camera is out i can start opening up the camera module this kills the module but if phone carnage made you queasy you probably wouldn't be subscribed like you are right now i can break open and peel away the metal housing surrounding the camera lens and the camera sensor you can see that the camera lens floats over the top of the sensor like a hoverboard from back to the future the top lens is wiggling to compensate for and stabilize the shakes that happen to the phone while you're taking a picture or video this type of ois can stabilize at about 1 000 times a second which is impressive but not quite as impressive as what's inside of the max taking a look at both camera housings we can see that the iphone 12 pro max is indeed quite a bit larger than the iphone 12 pro optical image stabilization has been a big deal for flagship smartphones for the past few years however professional real size cameras like this gh5 sometimes have a type of stabilization that is called sensor shift it's an internal stabilization method that moves the sensor itself to stabilize the image instead of moving the exterior lens it's much faster since it happens right at the pitcher collection point the sensor this technology has only been found in dslrs until now apple says they've included this sensor shift technology on the iphone 12 pro max it's on the largest sensor of the grouping and is just as difficult to get inside of as the regular iphone 12 pro but pretty much anything is possible with the razer blade i'm actually pretty excited to get inside of this one seeing brand new technology from the inside is why we're here once the back metal is off we get our first look at the bottom side of the camera sensor and it is indeed shifting moving around inside of the housing while the exterior lens stays in the same spot it looks like apple has indeed done it they've done something new i'll pop the camera lens off so we can see how it works apple says that instead of the normal 1000 adjustments per second that we see with regular ois this new sensor shift method can stabilize up to 5000 times per second which is a pretty big deal and means we get quite a bit more accuracy the camera lens portion of the housing has several large magnets and when i say large i mean the size of an ant but still proportional to the camera it's pretty big these magnets sit on top of tiny coils that can ever so slightly shift the position of that sensor the sensor shifts around inside of its housing just like we saw on the professional camera and at 5000 times a second it happens pretty fast of course the sensor of the max is a tiny bit larger than the iphone 12 pro which we can see now that they are side by side this means that the larger sensor on the max can absorb a tiny bit more light which is a good thing the pixel size themselves are also 0.3 micrometers larger on the max than they are the regular i'll let other reviewers be the judge of the actual camera image quality but if you want the best of the subtle camera improvements the iphone 12 pro max is where apple has put everything they've got i'll get the phone reassembled to make sure i don't break it this time around well break the important parts you know what i mean the phone should still work without the rear camera modules installed once the battery is plugged in and the metal plates are back in place the phone does indeed turn back on which is a good thing breaking two iphones in a row would have been kind of embarrassing with the cameras missing the camera app does still open up but just doesn't find anything to show us kind of interesting if you think it's fun to see the insights of high-tech technology but also enjoy things like water resistance warranties and your phone still working you might like my teardown skin it's an exact representation of what's inside of your smartphone while keeping all the important bits covered i'll have to update the sensor shift portion around the camera lens because it looks pretty cool but yeah i'll put a link for the teardown skin down in the video description we're covering more than 60 devices now so we probably have one for whatever phone you're using if you're curious about the large wireless charging coil or the ring of magnets you can check out my full iphone 12 pro tear down video where i explain all of that i'll leave a link for that in the description as well i think apple's done a good job this year let me know what you think of the sensor shift technology down in the comments and come hang out with me on instagram and twitter thanks done for watching i'll see you around
so apple's gonna hate me for making this [Music] video [Music] [Applause] [Music] so we all know that the back glass on the newer apple iphones are nearly impossible to repair even apple themselves charge 550 to repair the back glass on an iphone 10 and 600 to repair the back glass on an iphone 11 and 11 pro it's because the adhesive on their back glass is permanent now they're the only manufacturer that does this most manufacturers have an adhesive that melts away when it gets hot and you can remove the back glass and repair the whole phone for like 20 removing the back glass is so hard and so impractical that's why apple charges 600 to replace it on the iphone 11. in order for a third party to remove the glass it has to be subject to extreme temperatures i've even attempted to take the iphones to the opposite end of the temperature spectrum and use liquid nitrogen today though i think we found something that's more practical more repairable and takes the pain out of removing the back glass and it's all done with lasers [Laughter] so this guy right here is an all-in-one multifunctional laser machine that separates the back glass panel from the frame laser is an acronym for light amplification by simulated emission of radiation the red laser you see on top of the glass right now is mostly just to figure out where the phone is located so we don't start lasering the metal frame of the foam the laser is strong enough that will actually etch the metal so we're trying to stay on just the glass surface once we switch over to the white laser that's where it'll immediately start burning underneath the glass and separating the glass from the metal frame which is exactly what we're after saving ourselves about 500 or 600 apple if you're watching you can totally buy one of these yourselves and drop your prices just a little bit now as the laser is pulverizing all the adhesive underneath the glass there is quite a lot of fumes that come out so this is a vacuum that sucks up the fumes from the burning adhesive puts it through a filter and gets rid of the burning adhesive smell so this setup is from a company called riwa and the software they have included with it works with most every major manufacturer but today we're mostly worried about the iphones because those are the hardest to repair each design is already pre-programmed into the machine all the way from the iphone 10 the 10r the eight the laser can separate the bezel from the screen as well as the back cover and the back cover on the 10 is what we're doing today once i have the laser cut out selected make sure the phone's set in the right spot and then as soon as i hit mark the real laser starts going all the lasering you see happening right now is happening in real time none of this footage is sped up and the whole process only takes about five or ten minutes one pass with the laser underneath the glass gets rid of the bulk of the adhesive and we can do a second pass just to remove any of the remaining after that we can start removing the glass shards from the frame a laser is a concentrated light beam and that concentrated light energy can be absorbed by some objects but not others the laser would pass through the glass just fine but as soon as it hits the adhesive or the paint on the back of the glass the energy is converted to heat and starts pulverizing that paint and the adhesive and turns it to dust the higher power of the laser beam the more damage it can do and that is it the laser has removed the paint from underneath the glass so now the glass can fall away from the phone for the most part so you can see here the laser design is cutting out the black portions and that same design left the space for the wireless charging pad as well as some sensitive bits down here along the bottom but those sensitive bits don't have adhesive behind it holding it to the glass panel so we're just fine so now the laser has run its course we can take a look at the phone and see exactly what the laser has done taking a thin metal pry tool in between the glass and the frame of the phone i can slowly wedge the pieces of glass out away from the back now in a perfect world if the glass was completely crackless the laser would have gone through and disintegrated the layer of adhesive between the glass and the metal frame you can see the pulverized paint and adhesive getting on my fingers the laser has literally burned everything underneath the glass to ash but where cracks appear in the glass the laser refracts and doesn't quite burn away the adhesive so there's still some prying to do but it's still much easier than any method we've tried so far like extreme heat or liquid nitrogen now apple has designed their phone in a way where the glass panel sits underneath the camera lens which poses a slight problem for removal because that camera lens is welded to the frame and we want to leave that intact to make it an easier repair i'll slowly chisel out the glass from underneath that welded camera lens depending on what glass you buy there are third-party glasses that fit underneath this camera lens i would recommend though that you buy a glass back that fits over the camera lens i'll show you what i mean in a second it just makes the repair much easier because you don't have to deal with that lens so obviously i'm not a professional i'm just showing that the machine actually works someone who does this on a regular basis would do a much cleaner job but the technology is pretty fascinating so now we have all the glass shards away from the phone the phone itself is still working still functional even though the back glass is removed and now it's time to add the new glass it'll be good as new so when it comes time to select a piece of glass for your phone there's a couple different options one is you can get the glass with logo or without the logo apple's been pretty anti-repair from the beginning so the vendors that sell the glass with the logo tend to disappear if you're a business doing this on a regular basis you might want to buy the glass without the logo that way there's no copyright issues it's a d branded you could say the second thing to look out for is the cutout of the glass this white panel here you can see has the exact same cutout as the original piece of glass meaning we'd have to unweld the camera lens put the glass down and then glued the camera lens back into place which is a much more difficult repair so i recommend buying the piece of glass that has a cutout large enough to slip over top of the camera lens and then sits down snugly inside of the frame it's a much easier repair and no one's really going to notice the difference the adhesive i'm going to use to adhere the back glass to the phone is called e8000 it's a multi-purpose jewelry adhesive that adheres glass and metal i'll apply it to the metal of the phone in basically the same pattern that apple used initially and then do a super thin bead around the edge of the foam before i clamp the glass down into place there should be some seepage out around the sides of the phone this will help with water resistance even though i would not trust the phone to be water resistant and before the adhesive cures which is about 4-10 minutes we'll use some isopropyl alcohol to clean up the seepage from underneath the glass we want to make sure most of the overflow goo is gone before it has time to dry it's easier to clean up when it's wet you might be asking yourself what about water resistance even though we've applied the glue in the same pattern that apple applied the original adhesive water resistance isn't something that you want to trust in the first place much less after it's been broken and repaired you should keep your phone away from water either way one thing to keep in mind though with this laser machine is that the more cracks or the more shattered your phone is the harder it is for the laser to get through the glass if your glass is pretty much obliterated the laser is going to go down and get refracted all over the place and not burn through the adhesive underneath the glass so the less cracked your back is the easier it is for this machine to work either way though this machine brings the repair to a much more practical and sustainable level it's doable so each of these back glass panels costs about 20 bucks now granted we did have to buy a 2 000 machine but for a repair shop doing a lot of these on a regular basis it's a substantial improvement and i'm a huge fan of where the technology is headed lasers are pretty cool so obviously this repair is a bit more complex than your average tear down and requires some pretty expensive equipment but it's good to know that the repair is possible and that there are people out there doing it for much cheaper than apple repair is an option as much fun as playing with liquid nitrogen with the king of random was using this laser separator is much easier i have a feeling these machines are going to get real popular real quick i'll leave a link for these down in the video description so you can check out the current pricing as with all technology i'm sure the price is going to go down as time progresses if you have any questions leave them down in the comments come hang out with me on instagram and twitter and thanks a ton for watching i'll see you around these right here are all apple watch displays every single one of them my buddy's done so many apple watch repairs that he turns them into artwork
My goodness. I like this mysterious package. It’s always exciting to open the box, but I happen to know what’s inside. It’s a product prototype sticker that has attracted a lot of attention on the Kickstarter crowdfunding platform. This is not, this is The business card is still their CEO’s business card. Throw it away ♂~ The smallest mobile phone in the world is so small that it’s unbelievable. ZANCO tiny t1 The smallest mobile phone in the world. It's the "smallest" mobile phone. This is smaller than those. Synchronize contacts and music on your mobile phone. Monochrome screen voice changer. 3 days standby time.
Built-in Bluetooth mobile phone plugs into a Nano-sized card. It can store 500 text messages. This mobile phone has a voice changer. You can become male and female, children, old cartoon characters, teenagers, Optimus Prime Duck, EVA robot WALL·E robot, Rap guy and Rap girl are starting to become fun. Let’s take a look at this stuff. How small is your child! WOW! It’s so small that it’s unbelievable. Am I dreaming? It seems that there is a speaker SIM card inserted from the side on the back. Compared with this, I feel that the Nano card has become bigger and smaller than my thumb. It is about the same size as the SD card. It is about a coin. It is bigger than a small lighter. The ketchup bag is much smaller, about the size of two pieces of chewing gum, which is too small! With a micro USB cable for charging, there is also a card pin, which sells for $55. You may be thinking, who is the user group for this thing? I feel that this is a fun thing for people who will try all kinds of things .
I took this out at a party. Everyone was stunned. They would definitely be stunned to make a phone call with this thing. The buttons on the phone are better than me. His fingers are much smaller, Jack, what do you think? hhhhhhh This is Pixel 2XL. Of course, the two phones have different goals. But if you look at the comparison, this is too small . The boot time appears. When the battery is full, I need to insert the SIM card. Try to make a call. Woolen cloth? Looks like I have a text message . Let’s try to make a call. Will you have your cell phone number? Did you hear that? Not bad . It's connected. That's weird. Oh WOW! The speaker is quite loud Will: Yo~ Hey man, your voice is very clear. Will: Uh, your voice is also very clear. Really? I didn’t expect this thing to have a good call quality. You too, I feel very clear that I don’t need to bring my mobile phone like a secret agent. Just bring this and put it in my socks. If you want to go for a jog, but you’re afraid I have a phone call, but I don’t want to take such a big phone out.
You need a smaller phone, or should I try a voice changer? Okay, I’m going to change positions with Will, Will, your low voice sounds like a robot but it feels weird Things, for example, when you think about sending text messages, it’s surprisingly good to make a scary call. hhhh What the hell, this phone is not black yet. It’s $50. You can buy a normal phone, but it will definitely not be the smallest in the world. For those who like to collect, buy this as a gift for him, he absolutely loves it.
So the Series 4 Apple Watch with its rectangular
design and curved glass edges, looks pretty sleep and pristine unless, of course, it's
shattered. Replacement screens can cost almost as much
as the watch itself unfortunately. But what if replacing just the top glass
were an option? Today I'll show you that replacing just the
glass is indeed an option…while at the same time showing you why this repair should never
be attempted by mere mortals. Personally, I've tried multiple glass-only
Apple watch repairs before this one, each time failing catastrophically.
This time around I'll have some extra help
from a guy who does this on a regular basis. He's found a way to make these impossible
repairs possible. But still, without experience, I'd say about
99% of people who attempt this project will fail. Now that the pep talk is over, let's get started. [Intro] Removing just the glass on a smart watch or
cell phone is like trying to separate two potato chips that are glued together without
cracking either one of them. The concept of course is simple, but the execution
is near impossible. It's the brain surgery equivalent of smart
phone repairs. The initial trick is that the glass curved
edge of the Apple Watch Series 4 does not have any part of the display panel underneath
it, nor does it have the finger sensing digitizer under the curve. It does however have a super fragile square
ring around the bottom edge of the glass that rests up against the metal for the Force Touch
feature which is kind of essential to the functionality of the watch.
I'll show you what that looks like in just
a second. This is going to be one of those videos you
got to watch all the way through till the end. I'm not going to use any heat yet because
heat can damage the Force Touch ring by causing it to delaminate. So I'm gently pulling away the tiny cold glass
shards with my fine tip tweezers. Is this tedious? Yes. But remember we are working around layers
of technology that are more fragile than potato chips, so slow and steady wins the race. Once we have these smallest glass chips pulled
away from the frame, we can slide a super thin piece of stiff plastic between the glass
screen and the Force Touch ring, taking special care not to damage the fragile ring while
sawing my plastic back and forth to help it slip under the glass and slice through the
adhesive that's holding it to the black Force Touch sensor. Pulling up a sliver of glass at the wrong
angle can put pressure on the display that's under the glass and destroy it. It's like trying to diffuse a bomb that could
obliterate the watch at any second.
Also keep in mind that holding down the side
button for too long literally calls the police. Ask me how I know. Obviously, the more cracked the glass is,
the easier it is to work on because tiny slivers of glass can pull away easier. If the display ends up breaking with black
splotches or the touch sensitivity stops working, the only option at that point is to replace
the whole screen instead of just the glass, which is what we're trying to do here today. Remember, we still can't use heat yet because
of that Force Touch ring – it's still adhered to the metal frame. Every now and then I would run into a snag
along the glass edge requiring me to swap out my piece of plastic or grab my tweezers
to shimmy out another piece of glass. I've been at it for about 45 minutes now,
going slow and removing each bit of glass individually.
These watches are expensive, but if I can
salvage this screen by replacing just the glass, I can save quite a bit of money. I'll add each sliver of glass to my glass
collection off to the side until I have another opening big enough for the thin piece of plastic. I'll pop it in and start slicing between the
glass and the Force Touch ring.
This is a terribly tedious repair that I wouldn't
wish upon my worst enemy. It might be stressing you out a little bit
that the watch is still turned on at this point, but as long as I don't slice my plastic
too deep into the watch, the inner cables should be just fine…nothing's around the
edge. I'm leaving the watch turned on so I can easily
test and see if I've broken the internal potato chips or not. Once that screen is broken, there's no point
in continuing and I'm better off just buying the whole screen replacement instead of just
the glass. Finally, after removing all the little slivers
of glass and slicing my plastic under the larger chunks of glass, the whole screen is
loose from the Apple Watch body. Everything is indeed still working at this
point, which means we haven't messed up yet.
Cross your fingers it stays that way. In order to proceed I need something called
a vacuum hot plate. This beauty can suction down objects while
heating them up to soften the adhesive. It's a much more controlled environment than
using my standard heat gun. And since we're working with small and delicate
things, it is a needed piece of equipment for this project. I have tapped over all the holes but nine
so that we can have all the suction in one location.
I'll add another piece of tape over the cracked
Apple Watch screen so air won't slip through the cracks and cause it to lose suction…science. And I'll also turn off the watch. Once the machine is turned on it will start
warming up the adhesive that's holding the ribbon cables to the back of the screen. You can kind of see them pulling up right
here. There are 3 of them all lined up in a row
and this gives us some wiggle room to reach in and unplug the cables. The adhesive holding down the black tape over
top of these connectors is incredibly gooey and sticky and near impossible to remove gently…Thanks
Tim Apple. Normally alcohol doesn't solve problems, but
in this particular case, a drop of alcohol right on top of each of the connectors dissolves
the adhesive, allowing the tape to peel back a bit easier.
It will become sticky again after the alcohol
evaporates. Once the tape is peeled back over all 3 connectors,
I can pop the little black latch up at the top, which unlocks the corresponding cable. The latches themselves are extremely fragile,
just like everything else we've been dealing with today. Finally I'll grab ahold of the ribbons themselves
and the top of the screen, and gently but firmly pull the ribbons off of the screen. It's taken me about an hour to get to this
point in the process and we haven't even started the complex part yet. Going back to our vacuum hot plate screen
separator machine. This time around I'm going to use some high
tensile strength, super thin gold colored wire that I'll wrap around my finger to keep
secure. This wire is going to be placed directly under
the glass layer of the Apple Watch screen, but above the digitizer and screen layers. It's a small fragile sandwich of high tech
components, and if you pick the wrong layer to slide through, the whole thing is destroyed.
I'm not being dramatic, I'm just being realistic. You can see the wire sliding and slicing into
one of the gooey layers inside the sandwich – that's the adhesive between the glass
and the digitizer, and exactly where we want the wire to stay. It's like trying to separate the two halves
of a very expensive Oreo, but if you break the cookie part, you lose a couple hundred
bucks. I'll lift the wire over the remaining curved
glass chunks so it won't get caught on the edge or start cutting into the sensitive bits,
and then gently keep sliding the wire through the gooey warmed up adhesive layer. The whole thing is heated to about 80 degrees
Celsius right now and that's keeping the Oreo nice and soft for the wire to slide through. The suction of the machine is keeping the
watch screen from moving around too much while the wire is sliding through the adhesive.
Once the wire finishes the cut and pops out
the other side, the screen is loose and fully free to pull away from that top glass layer. The cracked glass is now removed from the
display. You can see some of the adhesive residue on
the digitizer layer which is sitting on top of the display layer, but that's pretty easy
to clean off. Nothing looks physically damaged yet so I
think we're still good to continue. The hardest part of the repair is now done…kind
of. The little bit of rubbery adhesive that is
left on the screen can be gently rubbed off, keeping in mind that this is like trying to
rub flavor dust off of a Dorito, and one wrong move can crack the whole thing. A little bit of acetone can dissolve the rest
of those lines and residue on top of the display. But before I go any farther, I want to test
and make sure my little Dorito is still in one piece, so I'll peel back the tape over
those connectors and pop each of the three ribbons into their latches on the back of
Nudging them into place with the t-shaped
bracket on the back of the ribbon. I'll turn everything on. The Apple Watch should still function at this
point even without the glass in place. The touch sensitive digitizer is still layered
on top of the screen portion. Yeah, it will be a tiny bit finicky because
it's designed to have a glass layer on top, but the watch should still function in general
at this point.
So far, so good. I'll turn the watch off again and remove the
cables from the back of the screen. Now it's time to add a new layer of glass
to the top. This part is pretty easy actually. Adding the glass requires a special kind of
glue. Once the screen is totally clean from dust
or fingerprints, I'll grab a little Lego to prop the screen up. I'll explain why in just a second. I mostly just wanted to say 'little Lego'
though. I'll clean both sides of the replacement glass
and add a dollop of Loca: Liquid Optical Clear Adhesive. This stuff is pretty cool actually. It's what's going to hold the glass layer
securely to the display. The important thing when setting the glass
down is that there are no air bubbles caught under the glass.
I did catch one air bubble during my first
placement, so I pulled that off and popped it with a pair of fine tipped tweezers and
then tried setting the glass down again for the second time. Resting the display on top of the Lego allows
the display to sit up inside the curve of the glass as it rests down into place. But once again, I caught a little bubble under
the glass as the adhesive flattened out towards the edges. It's not a huge deal, it just means that I
have to gently persuade that little bubble to migrate towards the edge of the glass with
a tiny bit of pressure.
This little bit of pressure is also pushing
out glue on the under side of the glass that I'll have to clean up later, but as long as
the Loca isn't getting on the electronics, I'll be okay. The cool part about this glue is that it's
not going to dry on it's own, it stays liquid and gives me plenty of time to clear the bubble
and make sure the display underneath is totally lined up underneath that glass. The display needs to be centered evenly on
every side, without any of the copper edges showing.
I can shine a light through the underside
of the display to make sure everything is proportional, and then I can hit the whole
thing with a UV or ultraviolet light. These magical rays of artificial sunbeams
are what dries or cures the liquid optical adhesive that's holding the glass to the display. It only takes a few seconds for the glue to
start hardening and then a few more minutes for the glass to become permanently attached
to the display again.
It's pretty crazy stuff. Thumbs up for that. I do have to clean out the seepage from under
the display from when I pressed out that little bubble, but once that's cleaned up I can cure
the underside of the glass to keep the edges from running, and then we're pretty much done. I'll grab the screen and pop all three of
those ribbons back into their corresponding latches and lock the fragile flaps gently
down into place. Then after making sure there's no glass slivers
or old adhesive or dust resting on that Force Touch ring, I can make sure everything still
turns on. I'm just as surprised as you are. How's them apples. The touch sensitivity still seems to be intact. I'll make sure to line the antenna tab on
the back of the screen up with the slot on the motherboard and set the screen down into
place to test the Force Touch.
And it looks like the Force Touch works. For such a fragile intricate project, we definitely
got lucky. I can add some water resistant flexible adhesive
to the edge of the display. I won't trust the thing to be water resistant
anymore of course, but the adhesive is going to hold the glass in place, and it's still
flexible enough to allow the Force Touch to work. This is an absolutely brutal repair. I've done this exact same procedure on a few
smart phones in the past so I'm familiar with the process. And even with my previous experience, it took
me close to three hours to finish this watch. This is definitely my first and last successful
glass only Apple watch repair. If you're wondering to yourself, 'Who in their
right mind would want to do this?' I'll leave a link in the description to my
buddy who helped me with this repair. He actually does this repair for other people
on a regular basis. It's kind of nice to save a few hundred bucks
by fixing a cracked watch instead of buying a new one.
Every version of the Apple Watch is going
to be slightly different. I'm pretty impressed with how good this turned
out though. Now if you'll excuse me, I'm going to go find
some Doritos and Oreo's that I can go crunch the crap out of. Come hang out with me on Instagram and Twitter. Hit that subscribe button. And thanks a ton for watching. I'll see you around..
Oh my God I like this mysterious package best Unboxing is always exciting But i happen to know what's inside This is a product prototype that has attracted a lot of attention on the Kickstarter crowdfunding platform Stickers This is not, this is a business card It’s still their CEO’s business card, shocked Throw away Ah ♂~ The smallest mobile phone in the world This thing is too small to be unbelievable ZANCO tiny t1 The smallest mobile phone in the world As you all know, I opened the box once called the "smallest" cell phone This one is smaller than those Sync contacts and music on your phone Monochrome screen voice Changer 3 days standby time Built-in Bluetooth Insert a Nano size card into your mobile phone, which can store 500 SMS You heard that right, this phone has a voice changer You can become a man Female, child, elderly Cartoon character, teenager, optimus prime Duck, EVA robot WALL·E robot, Rap man and Rap sister Started to get fun Let's see how small this thing is Ho Ho Ho! WOW! It's unbelievably small Am i dreaming Great profit! It looks like there are speakers on the back Insert the SIM card from the side Compared with this, it feels that the Nano card has become bigger Smaller than my thumb About the same size as an SD card About the size of a coin Smaller than a small lighter Much smaller than the ketchup bag About the size of two pieces of gum This is too small! With a micro USB cable for charging There is also a card pin This one sells for $55 You may be thinking, who is the user group of this thing? I think this is fun to make For those who will try anything I took this out at the party, everyone was stunned Use this thing to call They will be stunned The buttons on the phone are much smaller than my fingers Jack, what do you think? hhhhhhh This is Pixel 2XL Of course the two phones have different goals But if you look at this contrast, it’s too small Ok, boot up Time has come, full power I want to insert the SIM card and try to make a call What do you think? Looks like I have a text message Let's try to make a call, Will what's your phone number Did you hear Not bad It's connected, it's weird Oh WOW! This speaker is quite loud Will: Yo~ Hey man, your voice sounds very clear eh Will: Uh, your voice is also very clear Really? I didn’t expect this thing to have good call quality You are too, very clear Feel like a secret agent You don’t need to bring your mobile phone, just bring this, and you can put it in your socks Suppose you want to go for a jog, but you are afraid of a call and don’t want to take such a big mobile phone out.
You need a smaller phone Should I try the voice changer? Okay, I'm going to change positions with Will, Will you come over Low voice Sounds a bit like a robot But it feels so strange hhhhh Okay, this thing is made for fun The body is incredibly small Not bad for fun But if it comes to work, such as texting I feel scary when I think about it It's unexpectedly good to call hhhh What What the hell This phone is not as big as the black part You can buy a normal phone for $50, but it will definitely not be the smallest in the world But for those who like to collect, buy this as a gift for him, he absolutely likes
Oh my God I like this mysterious package best Unpacking is always exciting But i happen to know what's inside This is a product prototype that has attracted a lot of attention on the Kickstarter crowdfunding platform Stickers This is not, this is a business card It’s still their CEO’s business card, shocked Throw away Ah ♂~ The smallest mobile phone in the world This thing is too small to be unbelievable ZANCO tiny t1 The smallest mobile phone in the world As you guys know, I opened the box once called the "smallest" cell phone This one is smaller than those Sync contacts and music on your phone Monochrome screen voice Changer 3 days standby time Built-in Bluetooth Insert a Nano size card into your mobile phone, which can store 500 SMS You heard that right, this phone has a voice changer You can become a man Female, child, elderly Cartoon character, teenager, optimus prime Duck, EVA robot WALL·E robot, Rap man and Rap girl Started to get fun Let's see how small this thing is Ho Ho Ho! WOW! It's unbelievably small Am i dreaming Great profit! It looks like there are speakers on the back Insert the SIM card from the side Compared with this, I feel that the Nano card has become bigger Smaller than my thumb About the same size as an SD card About the size of a coin Smaller than a small lighter Much smaller than the ketchup bag About the size of two pieces of chewing gum This is too small! With a micro USB cable for charging There is also a card pin This one sells for $55 You may be thinking, who is the user group of this thing? I think this is fun to make For those who will try anything I took this out at the party, everyone was stunned Use this thing to make a call They will be stunned The buttons on the phone are much smaller than my fingers Jack, what do you think? hhhhhhh This is Pixel 2XL Of course the two phones have different goals But if you look at this contrast, it’s too small Ok, boot up Time has come, full power I want to insert the SIM card and try to make a call What do you think? Looks like I have a text message Let's try to make a call, Will what's your phone number Did you hear Not bad It's connected, it's weird Oh WOW! This speaker is quite loud Will: Yo~ Hey man, your voice sounds very clear eh Will: Uh, your voice is also very clear Really? I didn’t expect this thing to have a good call quality You are too, very clear Feel like a secret agent You don’t need to bring your mobile phone, just bring this, and you can put it in your socks Suppose you want to go for a jog, but you are afraid of a call and don’t want to take such a big mobile You need a smaller phone Should I try the voice changer? OK, I want to change positions with Will, Will you come over Low voice Sounds a bit like a robot But it feels so strange hhhhh Okay, this thing is made for fun The body is incredibly small Not bad for fun But if it comes to work, such as texting I feel scary when I think about it It's unexpectedly good to call hhhh What What the hell This phone is not as big as the black part You can buy a normal phone for $50, but it will definitely not be the smallest in the world But for those who like to collect, buy this as a gift for him, he absolutely loves
the galaxy s 20 ultra 5g might just be the most top-of-the-line highest end Android flagship we've ever seen with the best specs and longest name is it worth the $1400 though we've probably already know the answer but let's chat as to why inside the box we get the USB C 2 USB C charger some USB C corded headphones and a clear protective case and got a lot of free protection let's get started [Applause] [Music] now remember this ultra is Samsung's premium flagship for the moment price to have $1400 there are still the regular as 20s of course at the more reasonably unreasonable $1000 price point this review is going to be all about mr. premium here samsung seems to be really liking the soft screens these days luckily when I peel off this screen protector the display underneath doesn't die like we saw on the Galaxy d flip let's see if Samsung remembers how real glass is supposed to act we'll take a look at the large camera bump in just a second I've personally been using a samsung phone for the past four years or so as my daily device so I am a pretty big fan of the phones that Samsung makes usually as long as the advertising is pretty close to what gets delivered and we aren't robbed at the checkout I'm pretty easy to please with the s20 ultra we start seeing scratches at level 6 with deeper grooves at level 7 it's nice to see glass again this phone will be able to handle everyday objects and fingernails without getting scratched or dinged up my razor blade does no damage to the top 40 megapixel selfie camera the earpiece is up here as well and it's super thin slit there's no speaker grille to scratch or get damaged I'm a fan of this flatter screen design as well if the phone ever gets dropped the frame is going to be what gets hit instead of the glass which is good cuz glass is glass and glass breaks metal however might scratch but won't shatter the power button and volume button are made for metal and can still be removed I don't recommend stealing other people's phone buttons but if being a terrible human is your thing the option is available there are no buttons on the left side of the device nor on the top but there is a sim an SD card tray thumbs up to Samsung for keeping the expandable memory alive this guy can hold an additional 1 terabyte of storage with a normal micro SD card the slot helps future-proof the phone which is pretty important considering that $1400 starting a price point and how long you're gonna have to keep using it to pay it off the bottom of the phone has a little clear plastic protector to keep it from rubbing inside the box the bottom stereo speaker and USB C port are down here as well there is no headphone jack let's take a look for a second at the main selling point of this s20 ultra and that's the camera this boy is thick for people outside the United States the rise is about two point four millimeters tall for people inside the United States it's a bit thicker than a quarter yet also still pokes out above a toothpick the hump is a decent sized fraction of a fruit snack and it's just about the same size as a slice of butter I mean if you think about it the s20 ultra has four cameras one of which is a hundred and eight megapixels and the other is the 48 megapixel telephoto camera so the hump size is relatively reasonable and if you look closely you can see how much space that camera hardware actually takes up inside the phone check out how much room the hundred times space zoom periscope camera actually needs so that size of the exterior glass lens does match the dimensions of the hardware below it happy to announce my teardown skins with D brand or officially back we managed a hoard enough printer ink to hopefully keep them around long term this time we're covering a lot more phones with this patch and there are now two different styles of teardown instead of one you can see what they both look like on this grip case the original version on the right looks like it still has the shiny glass layer on the back or we have the new ultra matte version which looks like you're just holding the bare circuit boards personally I kind of like the glossy version true story I've had to tear down skin on my phone since our last batch and a stranger came up to me in public legitimately concerned that my phone was falling apart which means our skin is definitely doing his job I'll leave a link for the tear down skin down in the description of course I am getting ahead of myself this is a durability test video and not the teardown but there is one more thing we also tore down MacBooks Starbucks won't know what hit them you can see the dual fans with the batteries and my favorite part even the trackpad has its own see-through tear down protection you can see the copper windings for the taptic motor underneath there's a good chance we have a skin for your phone in your hand right now and we'll be adding more devices as the time goes on link is down in the description you're not gonna want to miss this one now don't get me wrong the ultra is a cool phone top of the line and all that jazz but it's not really doing anything that we haven't already seen before we saw the 108 megapixel camera already in the $500 Meno 10 and that periscope zoom camera we saw inside the p30 pro which also currently costs around $600 both of those phones with similar features are less than half the price of this ultra phone samsung has also taken their S 20 series and made 5g mandatory this time around and they charge a premium for it five G coverage still isn't even a thing yet for half of the United States and the millimeter wave the super high-speed portion of 5g is currently covering basically nobody the 5g phones are still very premature and paying a few hundred dollars out of your own pocket to sponsor a futuristic 5g tech you can't utilize is very much not worth it here in 2020 unless of course you do live in a large city and know for sure that the millimeter wave 5g system is right outside your window basically the $1400 galaxy s 20 ultra is made up of components that we can find another phones that cost half the price and includes a 5g system that most people can never use sometimes verbal burns hurt the most the 1440p AMOLED display lasted about 30 seconds under the heat from my lighter and did eventually recover the screen is also capable of a hundred and twenty Hertz refresh rate at 1080p we first saw this tech on the ROG phone – that's currently selling for five to six hundred dollars on eBay just another reason why this phone shouldn't be costing fourteen hundred the s20 ultra is using the under screen ultrasonic fingerprint scanner we saw debuted last year on the s10 I'll set my fingerprint first before adding some level seven deeper grooves to the screen and even with this additional artwork my phone was able to sense and read my fingerprint every single time the ultrasonic fingerprint scanners are safe from scratches I tried bumping up my exposure so we could get a look at the transparent pixels that surround the rectangular fingerprint scanner inside of the phone but it looks like we'll just have to wait until the next video to see how big it is the rectangle is still currently invisible Samsung hit it well finally it's time for the bin test honestly with how rock hard and rigid Samsung phones usually are I was surprised that this thick phone had a little bit of give to it it's the subtlest of sways of course probably due to the length of the phone and it's six point nine inch screen the s20 ultra does survive my durability test however no cracks kinks or permanent damage anywhere all I'm saying is if I had $1,400 in my pocket first of all I wouldn't spend it on a cell phone but if for whatever reason I had to it would not be this one the s20 ultra is a Frankenstein conglomerate of parts found in many other much cheaper phones and it doesn't bring anything new to the table if I wanted a top-of-the-line phone that screamed 2020 I would get the Galaxy Z flip even with its fragile screen its futuristic design and form factor warrant the $1400 price point way better than this s20 ultra does either way and every one is different but the one place you can't go wrong is with a teardown skin link is in the description let me know what you think tell me your thoughts on the s20 ultra down in the comments and coming out me on Instagram and Twitter thanks dumb for watching I'll see you around
So here's a new one for you, a smartphone
with two screens. This is the Nubia X – an Android smartphone
that comes with two built in screens, one on the front, and one on the back. You know we couldn't let this one slip by
without a full on durability test. Let's get started. [Intro] So supposedly if you want to work this contraption,
there are two fingerprint readers on the sides that when gripped allow whatever's displayed
on the front screen to slip over onto the back panel while retaining full functionality. You can run the whole phone from back here. When the rear screen is turned off, it looks
just like a normal phone.
Let's see what happens when we scratch test
both screens. This Nubia X comes with a builtin screen protector
which is nice. I'll pull that off. The interesting thing with this phone is that
there's no notch, there's no front facing cameras or sensors that need to be hidden,
which allows the whole front of the phone to light up edge to edge, as a display with
pretty much no bezels. As we see from the scratch test, the front
is made with tempered glass, scratching at a level 6, with deeper grooves at a level
7. We've got to be fair to both screens though. I'll grip the sides and flip it around. The rear screen has a much lower refresh rate
than the front screen, and has kind of a yellow tinge to it. It's also covered with a screen protector. I've found that the yellowness is just a blue
light filter that can be removed. I'll show you that in a second. The blue backing on the phone is kind of like
reflective film that acts as a 2-way mirror, that hides the second screen when it's turned
And once again we get scratches at a level
6, with deeper grooves at a level 7. The rear screen is covered with the same glass. Part of what makes the front screen so bezel-less
is how small this earpiece is. I almost missed it. It's barely the thickness of my razor blade. The sides of the phone sound and look like
anodized aluminum. You can see the silver color shining through
under the blue coating, even here on the blue power button. One possible weak point in the frame is this
flattened portion where the fingerprint scanner resides.
It looks suspiciously like the design flaw
we saw on the iPad Pro, and we know how that one turned out. This phone has 2 of them, one on either side. I'm kind of nervous. The top of the phone has more metal and what
looks like an IR blaster up top for changing the channels on your TV. On the other side we have the SIM card tray,
volume rocker, and another flattened fingerprint reader…because why have just one fingerprint
reader when you can have two? Two is kind of the theme of this phone.
There are 2 SIM card slots as well, which
pair nicely with the two screens. Just one USB-C port down here at the bottom
alongside the loudspeaker holes. You might be thinking to yourself, 'Jerry,
why in the world would anyone want two screens on their phone?' Well let me tell you. There are no front facing cameras on the Nubia
X, just these two dual rear cameras: a 16 megapixel and 24 megapixel. One regular and the other one for that portrait
mode stuff. So when you want to take a selfie, you get
to use the powerful rear facing cameras while seeing your face at the same time. It's an interesting solution to the notch
problem, but also a solution that actually works. I'm impressed with the ingenuity – I genuinely
did not see this one coming. Like dual everything else on the phone, there
are two fingerprint scanners. You can use one or set up both for added security. And even with the damage inflicted on the
right side, the phone can still sense and unlock my fingerprint. Not too shabby, but at least there's a backup
if one ever fails. Now here's where things get interesting.
This front screen is a 6.2 inch 1080p IPS
LCD, meaning that after about 10 seconds we see the pixels getting hot, turning off and
going black, until the heat is removed, and then they slowly recover. They do recover completely though. Checking the back screen though, is where
we see one of the brilliant parts of the Nubia X design. An LCD screen when turned on has light shining
through every single pixel, even the black ones. So the whole display lights up. An LED screen or an AMOLED screen does not
have light shining through the black pixels, so you really can't tell when the screen is
on or off because the blacks are so black and emit no light. The Nubia X is using a 5.1 720p AMOLED screen
on the back, an LCD on the front, and AMOLED for the rear. You can see the pixels going white and not
recovering. Both technologies on one single device – burn
test justification. Checkmate on the haters.
The rear screen can act like an always-on
display without showing the actual edges of the screen. This provides the aesthetic illusion that
there's no screen at all on the back panel. Whether the screen is lit up or not, you can't
really see the rectangular edges due to the super black AMOLED pixels. It's interesting how all these innovative
smartphones keep popping up out of nowhere. No complaints from me. Here's a quick look at the rear display with
the blue light filter turned off. It looks completely normal and has as good
of quality as the front screen. I'm not sure why the Nubia X had that setting
turned on right out of the box. I think it looks pretty good. All of these awesome gimmicks though mean
nothing if the phone can't survive in your pocket for a few years. Here on my channel we put phones through years
of abuse in just a few minutes. It's time for the bend test. The dual fingerprint design on both side rails
might just be fatal.
With a solid flex from the front, we get minimal
bend, but no catastrophic damage, creeks or snaps. The rear screen looks fine. Even when bent from the front, the phone remains
intact and fully functional. No complaints here. The Nubia X is a structurally solid device,
even with all that fragile tech packed in, and while having screens on both sides, this
phone survives. As a side note, if one screen does actually
break, you can always just use the other as a back up since it does come with two. Do you think this phone is the future? Is a dual screen phone a better solution than
a motorized front facing camera? Which one do you prefer? Back to back screens are definitely fascinating. Hit that subscribe button if you haven't already. And come hang out with me on Instagram and
Thanks a ton for watching. I'll see you around..
Oh my God I like this mysterious package best Unpacking is always exciting But i happen to know what's inside This is a product prototype that has attracted a lot of attention on the Kickstarter crowdfunding platform Stickers This is not, this is a business card It's still their CEO's business card, shocked Throw away Ah ♂~ The smallest mobile phone in the world This thing is too small to be unbelievable ZANCO tiny t1 The smallest mobile phone in the world As you guys know, I opened the box once called the "smallest" cell phone This one is smaller than those Sync contacts and music on your phone Monochrome screen voice Changer 3 days standby time Built-in bluetooth Insert a Nano size card into your mobile phone, which can store 500 SMS You heard that right, this phone has a voice changer You can become a man Female, child, elderly Cartoon character, teenager, optimus prime Duck, EVA robot WALL·E robot, Rap man and Rap girl Started to get fun Let's see how small this thing is Ho Ho Ho! WOW! It's unbelievably small Am i dreaming Great profit! It looks like there are speakers on the back Insert the SIM card from the side Compared with this, I feel that the Nano card has become bigger Smaller than my thumb About the size of an SD card About the size of a coin Smaller than a small lighter Much smaller than the ketchup bag About the size of two pieces of gum This is too small! With a micro USB cable for charging There is also a card pin This one sells for $55 You may be thinking, who is the user group of this thing? I think this is fun to make For those who will try anything I took this out at the party and everyone was stunned.
Use this thing to make a call They will be stunned The buttons on the phone are much smaller than my fingers Jack, what do you think? hhhhhhh This is Pixel 2XL Of course the two phones have different goals But if you look at this contrast, it’s too small Ok, boot up Time has come, full power I want to insert the SIM card and try to make a call What do you think? Looks like I have a text message Let's try to make a call, Will what's your phone number Did you hear Not bad It's connected, it's weird Oh WOW! This speaker is quite loud Will: Yo~ Hey man, your voice sounds very clear eh Will: Uh, your voice is also very clear Really? I didn’t expect this thing to have a good call quality You are too, very clear Feel like a secret agent You don’t need to bring your mobile phone, just bring this, and you can put it in your socks Suppose you want to go for a jog, but you are afraid of a call and don’t want to take such a big mobile phone out.
You need a smaller phone Should I try the voice changer? OK, I want to change positions with Will, Will you come over Low voice Sounds a bit like a robot But it feels so strange hhhhh Okay, this thing is made for fun The body is incredibly small Not bad for fun But if it comes to work, such as texting I feel scary when I think about it It's unexpectedly good to call hhhh What What the hell This phone is not as big as the black part You can buy a normal phone for $50, but it will definitely not be the smallest in the world But for those who like to collect, buy this as a gift for him, he absolutely loves.